Product usage tips
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
Disclaimer
Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of microorganisms in the system.
UF membrane element size
Operation Guide
During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry state. For manual operation, the water production rate should be set to 50% of the design water production rate, and the initial water production must be discharged directly and cannot be used as product water.
Partial OEM model parameters of SINOMEMB ® UF membrane
| UF specifications and models | Membrane material | Operation mode | Membrane element size (mm) | Effective membrane area (㎡) | Nominal filter pore size (μm) |
| SNU-HO-2-Z160S | PVDF | outside-in | Φ160×1330 | 30 | 0.03 |
Note: The element model (membrane performance, appearance size) not mentioned can be customized according to the order quantity.
PTFE hollow fiber membrane product specifications
| Type of Microporous Membrane | FC-M1 | FC-M2 | FC-M3 |
| Regular Specification(D×d/mm) | φ2.35×φ1.26 | φ2.26×φ1.18 | φ2.26×φ1.18 |
| Pore Size(µm) | 3.5 | 0.45 | 0.2 |
| Hydrophilic or not | no | no | yes |
| Tensile Strength(N) | |
| Material | |
| Operating pH | |
| Usage Temperature(℃) | |
| Application Fields | for example, FC-M3 hydrophilic membrane is usually used in domestic water filtration, laboratory sewage filtration, heat insulation sheath and so on |
Company information
SINOMEMB Environmental Industry Group founded in 2012, it’s a high-tech enterprise group with membrane separation technology as its core. From the original water treatment membrane product development, manufacturers, gradual development to build a high-end separation membrane materials, environmental engineering equipment, environmental protection science and technology service three big business section, It has become a comprehensive environmental protection group integrating R&D, manufacture of separation membrane materials , membrane equipment manufacturing and engineering operation and maintenance, and it is the world's leading membrane solution provider.
Product Tags:
|
|
PVDF MBR Membrane with 0.1 μm Pore Size and 160×1330mm Dimensions for Waste Water Treatment Images
|
